what should the compression of a 60 hp evenrupe boat motor?

  Add Your Answer
Insert:

Related Answers

Explore the latest questions and answers related to "what should the compression of a 60 hp evenrupe boat motor?"

Answered: Where is clutch located?

between the engine and the gearbox.

Answered: I have a 4hp motor on a 12 ft. v-hull boat. The ...

A "whaletail" helps, no question about it. A 4hp motor is a little on the small side to get your boat up on the step. You can adjust the tilt of the motor so the prop is further toward the front of the boat . That will put a slight downward pressure to the front. Another thing you can do is put ...

Answered: How to size a capacitor for 1 hp motor rated for 110/220 v. at 3450

If you need a replacement starting capacitor, take the one you have that's defective and go to a supply house that sells capacitors and other electric motor parts. They should be able to give you a replacement. The capacitor on my pump died, I got the replacement from a business that sells parts ...

Answered: Neptune electric boating motor control

I saw that boating motor too on tradingpost . Maybe you can ask them where to take it for repair.

Answered: Put the lower end of boat motor back on but now ...

Very obviously something is in a bind. If it worked well before you installed the water pump, and now it doesn't...then the only conclusion is that you did not put the unit back together in the correct manner. (I've done this many, many times) I hate to say it but take it back apart and you will ...

Answered: I have a evinrude motor with a serial # of 15012-23784 what is the year

cant tell by that you need the model number, it will read someathing like E90TLERS What you look at are the 2 letters E and R This number would be a 94 decode with INTRODUCES. I=1, N=2, T=3 and so on with S=0 hope this helps if not e-mail me the model number and ill e-mail you the year and part ...
Liked this question? Tell your friends about it

More Questions

What would cause a 40 horse power boat to catch fire the wiring inside of

If the wiring caught fire it was probably a bad fuze or the absence of the fuze. There should be a big in-line fuze (50 amps or so) in the wiring bundle near the engine. If you have the fuze and it still burned check the amperage of the fuze.

Where is the needle valve located on my boat motor

the needle valve is in the carberatour, there will be a needle that is operated by the float and the thing that the needle is resting in is the needle valve or seat

Evenrude 90 hp outboard motor shaft replacement

The answer on Yedda was very helpful and I am sure will save me some headaches. Jim

Is 60 Minutes a fake show? It's been on the air 45 ...

It was quite a good show for many years. Then they got lazy and frankly became irrelevant, populated by old farts who were so out of touch with reality they were broadcasting stories from like 1945. It should have been put out of its misery like 30 years ago.