Originated From
AOL Search

Wen electric chain saw motor sparks when cutting

Liked this question? Tell your friends about it


I assume you mean that the motor is sparking?  If so the brushes are most likely going bad.  They wear down with time and can be replaced most often very inexpensively.

Ask a Question... We'll forward it to people who know

More Questions

I'm using a old Electric Wheel Chair motor to turn ...

I don't know if it will work, but you might try a 12v battery charger.

A/C motor

there should be a diagram with options on a fixed plate on the motor. if i understand you depending upon how you change the internal taps. you should be able to go 208 v/ 230-240 v or 480 v if in doubt go to your local hardware and for around $10 you can get an UGLIES book . this condensed trade ...

Self generating electric motor

can you take a ac electric motor and turn it in to a genrater

Chain saw error

No not at all. Drain out the oil in the gas tank as much as possible then fillup with the correct 2 stroke mixture. Regarding the fuel in the oil pump , drain this out and refill with with chain oil , the sticky stuff.