Originated From
Hometips

Installing a threshold into concrete

I have to install thresholds to complete my hardwoods we laid recently. The flooring under is concrete and am not sure how to intall the thresholds onto conrete. Please help.........

Liked this question? Tell your friends about it

Be The First To Answer

Other people asked questions on various topics, and are still waiting for answer. Would be great if you can take a sec and answer them

More Questions

Installing cabinet

This is geometry. When you tilt the cabinet, the height of the room is the hypotenuse. The opposite side is 2' depth of the cabinet. The new height of the cabinet will the the adjacent side. Sine = 0/H = 2/8 = .25 arcsin(0.25) = 14.48° Cos(14.48) = 0.97 Multiply 8 by 0.97 7.75 ...

New concrete patio over existing concrete patio

I have been doing concrete for 22 years and yes that is fine what they are doing. Your old concrete would become a footer and the reason he would br trimming off 4 to 6 inches from the side would be to mke the outer perimeter a honch for stability

Can I install pre-finished wood flooring over a solid wood floor? If I

You can read this article on: How to install hardwood floor

Can commerical trucks drive on a driveway made of 2 3/8 inch concrete

This all depends on the base below the pavers. These are 6cm pavers and I normally wouldn't recommend driving heavy equipment on anything less than 8cm (3" thick) pavers. However, if your base is 12" thick or more and it was compacted properly in 2-3" lifts using a heavy duty plate compactor (not ...