how to thin dried pvc cement?

Related Answers

Explore the latest questions and answers related to "how to thin dried pvc cement?"

Answered: In the 1970's a guy from Iowas built a cement boat ...

There have been many concrete boats built, particularly during WWII when steel was scarce. The boats were surprisingly fast, as they weighed only a bit more than steel ships and cost 1/2 less to build. The problem is that concrete has a limited lifespan in salt water. At the end of WWII ...

Answered: Cutting Decorative Circles in a PVC Pipe

Lucille...I use a dremmel, and sometimes a regular drill on slow speed with a drill bit that is used for making holes in doors for door knobs. You can buy a kit of three sizes at The Hme.Dpot, or Lowz. If you draw the design on first when you use a dremmel,with a cutting blade you can make almost ...

Answered: Crumbling cement pourch

First use Apoxy Bonding [white liquid, or blue liquid, almost like Elmers Glue. Paint this on, let dry and use a Top and Bond cement, any cement without stones in it.

Answered: Cement

1 part cement, 2 parts gravel, 3 parts sand. Mix it together and add water until looks like wet dough. level the area you wish to cement, put a heavy nylon sheet on the ground and put wood boards as limits (hold them firmly in place with metal sticks). put a wire mesh at about 2cm hight from the ...

Answered: Cement Filled Drain

did you replace the pipe well thats better, used copper pipes insted terra-cotta pipes
Liked this question? Tell your friends about it

More Questions

Is dry vermouth the same as dry sec?

No. Although dry vermouth and dry sec are both while wines, they are different.

Est. for cement job

Robert: This is a two part answer. 1. No slab is any better than the prepared subgrade beneath it. All vegetation, roots, etc should be removed (they would rot, leaving soft spots and/or voids beneath the slab) and the site should be well compacted (perhaps requiring compacted base material to ...

Can you join a pvc p-trap to an abs pipe?

Yes you can add both the pipes.