how to remove the front drive shaft in a 2003 chevy s10 4wd pickup?

Related Answers

Explore the latest questions and answers related to "how to remove the front drive shaft in a 2003 chevy s10 4wd pickup?"

Answered: Has a 1989 chevy S10 pickup 4.3 V6 have a fuse for the fuel pump and

I found that there is no fuse between the fuel pump and throttle body, the fuel pump relay is the only interupt in the line.My problem was a blown fuse to the ECM1 that was caused by the left injecter wire shorting on the metal breather cover and a plugged fuel filter.

Answered: I have a 98 Chevy Blazer and was driving it and it ...

It could be your mass air flow sensor,or a o2 sensor

Answered: Repair drive shaft

Step 1:Support the car on ramps or jackstands for easy access to the bottom of the car. Follow the manufacturer's instructions for either device. Put the car in neutral. Step 2:Locate the rear yoke and mark the end of the drive shaft (hard chrome plated shaft )at the yoke to ensure that the new ...

Answered: What other year model front windshields can I use to replace the one on

You need to call a Chevy parts dept and ask them or call a wrecking yard that stocks Chevy parts. They both always have the answers on year combatibility. Most auto glass shops also know the answer.
Liked this question? Tell your friends about it

More Questions

Will 235 - 75 -15 tires fit on my 86 s/10 chevy pickup,4 wheel drive

Yes, they will fit. Maximum tire width for your vehicle is 255mm So you have extra 20mm to use) 235/75/15 tires

How do i remove bed on a 94chevy s10 pickup?

unbolt the bed two bolts hold it on you have to go under the truck to reach the bolt have someone else turn the nut

2000 toyota replacing a steering knuckle on a 4wd no abs

you can call thne and ask for that details. they will give you good help. home remedies for genital herpes

How to remove door handle on 1972 chevy pick-up?

Remove the door panel before working on the exterior door handle. The door panel removal will differ slightly depending on the truck model, but the basics are the same. Pop off the plastic door lock trim and the cover around the interior door handle with a flat head screwdriver. Remove all ...