how to remove catalytic converter for chevy s10?

Related Answers

Explore the latest questions and answers related to "how to remove catalytic converter for chevy s10?"

Answered: Has a 1989 chevy S10 pickup 4.3 V6 have a fuse for the fuel pump and

I found that there is no fuse between the fuel pump and throttle body, the fuel pump relay is the only interupt in the line.My problem was a blown fuse to the ECM1 that was caused by the left injecter wire shorting on the metal breather cover and a plugged fuel filter.

Answered: How will a bad catalytic converter affect the ...

A cluged catalic convertor will choke the motor emisio and will lower the preformence of it.

Answered: Very important!!!

I'm assuming that you have an O2 before and after the cat. If you install a high flow cat it may not satisfy your computer. If the O2 sensor doesn't read the gases it's suppose to it will keep popping the check engine light. I don't think reprogramming the computer will work either. There will ...

Answered: What other year model front windshields can I use to replace the one on

You need to call a Chevy parts dept and ask them or call a wrecking yard that stocks Chevy parts. They both always have the answers on year combatibility. Most auto glass shops also know the answer.
Liked this question? Tell your friends about it

More Questions

Galvanic corrosion

you can have galvanic corrosion when you place two different metals in contact, and you need also to have an electrolyte, for example water, that wets both metals. if you want to avoid galvanic corrosion you have to separate the metals with something that is not an electrical conductor, for example ...

What does it cost to replace a catalytic converter and exhaust system in

You should ask the people who do that kind of work to give you an estimate. That would be a Toyota dealer, a muffler place, and maybe your local gas station. Prices may be different in different cities.

How many bolts bolt the transmission to the engine in a 2002 chevy s10

The bell housing has 7 bolts from 1977-2003. From 2004-2013, it has 7 bolts also but has a different pattern. If you have to, you can make an adapter plate from 1/4" hard aluminum plate. Just get the smooth T-3 plate, and back up the bolts with hard chrome inserts from Hurst. Never put steel ...

What is flex fuel chevy s10?

It's a light (small) pick-up truck, the EEC is programmed to recognize and accept E85 as well as regular gasoline or gasohol, for use as a fuel. S-10's were made by Chevrolet, a division of General Motors.