How do you clean the oilways on a stihl chain saw?

Related Answers

Explore the latest questions and answers related to "How do you clean the oilways on a stihl chain saw?"

Answered: How can you clean a metal chain?

When using chemical rust removers, be sure you are outside in a well-ventilated area. Depending on the chemical, harmful fumes may be released in the cleaning process, such as acid vapors.

Answered: Chain saw error

No not at all. Drain out the oil in the gas tank as much as possible then fillup with the correct 2 stroke mixture. Regarding the fuel in the oil pump , drain this out and refill with with chain oil , the sticky stuff.

Answered: I have a gasoline chain saw which is 20 years old ...

Make sure you use the right gas/oil mix,...16to1 32to1 etc etc for that chain saw. It should tell you in the manual that came with it. Use chain saw oil Only. Don't use motor oil. if you don't have the right mixture you will burn the motor up. you will also need to put bar and chain oil in it ...

Answered: Electric chain saw replacement chain 14'

Google the brand of saw for re order

Answered: Tube from oil resevoir--where does other end go?

the oil from the reservoir is there in order to lubricate the chain while it is being used. it drips on the chain as it runs, otherwise the chain would run dry and it would stop working.
Liked this question? Tell your friends about it

More Questions

Basket cleaning in clothes dryer

if you use dryer sheets in your clothes dryer the stuff on them can build up in the holes of your dryer lint basket,take it out put in some hot soapy water and scrub it with an old toothbrush or other brush to get all the residue off ,if it continues to build up without regular cleaning it can cause ...

Cleaning upholstry

For any type of stain, whipped detergent works well. Fill a container with half dish detergent, half water, and use a hand mixer to whip it up. Use a rag to rub the froth into the spot, and then rinse with water. Alfakleen chemicals Labs www.alfakleen.com/

How to clean circular saw blades?

I'm shaking my head. If you got a cheap blade filthy with something, what is the reason that you don't toss it. If you have a finish blade, you shouldn't be cutting anything but clean lumber. Is this a general question, or is there a specific soiling agent? I am not sure that I would use lye as a ...

Chain oiler pump /

The oilers on this saw are junk,Ive been fighting mine mine for 3 years had it to shop 5 times same old sh-t.I,ve been though 5 bars and 10 chains.Saw runs great just got to keep a gallon of oil sitting next to you to dip the bar in!!!!