how do i replace shift solenoid on 2000 chrysler sebring jx?

the starter sounds like its bad if you hear it click but not engage the flywheel.

If you do NOT HAVE one existing, working remote, you will not be able to program a remote without diagnostic equipment. A LOCKSMITH so equipped can do this service for you. If you DO have one working remote, and you wish to ADD one, This is how: 1. insert key, and turn to RUN position ( just ...

We are leading manufacturing industries of Oxygen plants, Oxygen gas Filling Plant, Oxygen Machineries, Oxygen Factory, Oxygen Separator, Nitrogen plants, Cryogenic oxygen plant and Air Separation Plants suppliers in India.

The camshaft sensor is on the front of the left-hand cylinder bank. This corresponds to the right-front side of the engine bay, near the coolant tank. It's held in with 2 screws. -------------------------------------------------- ELM327 Vgate Scan

The window alignment could be off or the plastic gear may need to be adjustment. Regardless, the interior panel will need to be removed to inspect the problem. If you don't feel comfortable with doing so yourself bring it to a auto body shop or garage.

As it is a joint part, so it may take a year to cure. I know it pains a lot but try to bear the pain, still if it goes worse then go according to the doctor. Else consult with some other doctor.