Originated From
AOL Search

How to replace fuel filter on MAC 3200 chainsaw

Liked this question? Tell your friends about it


The Fuel filter is on the end of the gass pick up hose. Using a small thin wire with a hook bent on the end fish around and gently pull the hose and the filter out though the filler opening. Be carefil not to pull too hard as this might damage the hose. If there is a clip holding the filter to the hose, slid it away fro the filter. Then gently with a twisting motion pull the filter off the hose. Peplace the filter with a new filter, slide the clip  back up the hose to hole the filter on and carefully work the assembly back into the fuel tank.

Take time to relax!!! Go fly a kite!

Related Questions

Other people asked questions on similar topics, check out the answers they received:

Asked: How can I repair a broken garden hose?

How can I repair a broken garden hose?

Asked: Free Home Repair

Is there a Meals on Wheels home repair in Atlanta, Georgia(Snellville)

Asked: MichianaStructual basement repair


More Questions

RO DI Filter replacement

Most ROs offer no indication when the filters need to be changed. Quality ROs will have some indicator reminding the owner that filter life is nearing its end. Don't confuse the filters with the membrane, which is not a filter but a water-separation device. These can last for many years on some ...

Finding a fuel filter on a chevy truck

Where is the check valve in the fuel system for Chevy Cavalier 98.

Chainsaw repair

It could be several things. The first thing that you need to look at is the oiler adjustment screw. You should see it if you invert the saw. Turn it towards the plus mark.

How can I find the fuel filter on a 1999 Chevrolet Van 2500

On GM products it's usually close to the tank. Under the vehicle, find the fuel line coming out of the tank and follow it to the filter.