can you burn wax myrtle wood?

Related Answers

Explore the latest questions and answers related to "can you burn wax myrtle wood?"

Answered: Best way to clean a wood burning stove?

Me. I would call a chimney sweep. This is not a job for the faint-hearted, the unequipped, or the uninsured.

Answered: Can you put Mineral Oil on a Soapstone Wood ...

Get some rubbing compound. I seriously doubt that oiling it up would cause a fire, but it would put out some smoke. When it's cold enuf for a fire, you don't want to be opening all the doors and windows to air out your house.

Answered: Which fire wood burns slowest?

Hi, I had this amazing experience: We had a fire camp in South Africa in a private farm. The owner said that a certain wood will burn all night. I said it's impossible. He insisted and was right We used 3-4 dry brunches and in the morning they were still burning(some 10-12 hours). The owner ...

Answered: What floor is ok under a wood burning stove?

We built a frame out of 2x2s and plywood, inside measured 48"x48", we then inserted 4rows x 4 rows of 12" red bricks. Works wonderful. We also built a fire wall to keep our walls safe.

Answered: Are wood burners (garden type) OK for the environment as they don't burn

Wood burning outdoor fireplaces are a safe and environmentally friendly way to warm your backyard, porch, patio, or garden area.

Answered: Im going to fit wood burning stove with metal flue in existing chimney

There are existing stove pipes sold that are double wall with insulation in between so that you don't start a fire within your chimney.
Liked this question? Tell your friends about it

More Questions

I have little area where sun can shine on my split ...

Air so it won't rot and age. Sun isn't needed to season wood.

How much clearance do i need between a wood burning stove and a over head

go to hearth.com, lots of information regarding installation and clearances for wood burning stoves

What do you do when the polyurethane gets peeled ...

Hello, lightly the sand the areas with a 220 grit sandpaper to remove/feather out the edges where the poly came off, match the finish sheen and brush it on, remember two to three light coats are better than one heavy coat.