Racquetball Champ

 
Member Since January 17, 2011 , From United States

Recent Activity by Racquetball Champ

Answered: What are the bolts that connect the engine to ...

transmission to engine bolts. they would be dealer parts. if you have the size and thread of the bolts you may be able to go to a hardware store and find them.

Answered: Neon battery

yes that means your alternator is working, if your alternator wasnt the vehicle would die immediatly

Answered: No power to the fuel pump on a 1993 BMW 318I ...

relay has 12v power to it but is probably ground activated. computer probably supplies ground to initiate relay.

Answered: 01 chevy have a hum after it is cranked & running ...

most common is alternator bearing, idler pully's or waterpump. hold a screwdriver on the alternator while its running and put it to your ear and see if thats it, then do the same to the idler pully's ...

Answered: Have a crate 4.0 motor for a 2001 jeep grand ...

It will have to be timed. If old engine still turns over put it in TDC#1 cylinder and see where it points and do the same to new engine. the 4.0L engine has a crank sensor on the flywheel and the cam ...

Answered: Auto diagnostics 1994 corolla not changing gears ...

sounds like a speed sensor problem if speedo isnt working and not shifting gears

Answered: I live in tidewater virginia and have a patch ...

dig a deep hole under the problem area and add rocks till its 3 inches from the top, lay down a landscape fabrick cover it with some sand and topsoil then replace the sod/grass. that should help with ...

Answered: Noise

sounds like a wheel bearing

Answered: How do i find out the gear ratio for my rearend ...

take the cover off and count the teeth of the ring gear and pinion gear then divide the ring gear by the pinion gear, that will give you your answer. example 12 teeth on pinion gear, 42 on ring gear ...

Badges

Topics of Interest

Contacts

Racquetball Champ has no contacts.

Compliments

Cecil says:
"thank you for your prompt answer. regards cecil "
Jack g says:
"Thanks got part out all full of corrosion copper contact almost off high speed only part at dealer and napa $150 on line $85 thanks again"