Member Since July 11, 2008 , From gRAND JUNCTION, United States
Ask
Liked this profile? Tell your friends about it

Recent Activity by sdanglergj99

Answered: I'm trying to wire thermostat for bryant heat pump ...

In a heat pump your Y1 call is heat, and when in cooling mode the tstat energizes O. From the outdoor unit hook the white wire to the W terminal on indoor unit. I have never jumped y and w on the ...

Answered: My 2 story home is approximately 2200 sq ft. How ...

Not enough info.... (sun exposure, insulation type and value, ceiling heights, window types... and many other's) never always go by the old 500sqf per ton method.

Answered: My builder provided me with a 10 yr parts and ...

There is probably a leak in the linesets and they are in a wall or inaccesible. My thoughts are there has been no coil leaks and they are just trying to get through the warranty period. Pay to have ...

Answered: My central air unit continuously runs. I have had ...

Could be sized wrong also..... Shardee is right though try to get a tech that is NATE certified...... Any bozo can get a refrigerant license and say they can work on A/C systems, but NATE techs have ...

Answered: Replacing a compressor

Yes and No........ SEER rating is effected by the capacity of the system. Generally changing the compressor wil not change the seer rating, and if you do not have the proper equipment (recovery ...

Answered: Heat pump going into defrost when in cooling mode

Defrost mode on a heat pump is cooling mode......... You must have a tempering kit that fires your secondary or supplemental heat........ replacing the defrost timer or board should work, but really ...

Answered: Need to choose heating and air system to ...

Have used all the above, Trane is best.... Goodman ranks on the low side with Ruud. In 2010 they are phasing out r-22.........

Answered: In the cold-air duct system of force air ...

Depends.... If in a mobile home, you must leave in place and should be set at at least half way. If in a standard home it can be remove.... I would suggest putting an actuated damper and an FRV ...

Answered: Saving on Home Heating Costs in Winter

Humid air feels warmer and retains more heat......... Maybe, I have found that humidity levels around 35 to 40 percent are best.

Answered: Gas furnace igniter tubes won't light.....

Depends on the age of the system. Is the gas valve actuating? Is there pressure switches (is the flue blocked) is the inducer fan running? Need more info to help

Activity Summary

Topics of Interest

Contacts

sdanglergj99 has no contacts.

Compliments

No compliments were posted on sdanglergj99's profile yet.