Chuck

 
Member Since June 20, 2008 , From ocklawaha FL, United States
About Chuck:

 

 


Ask

Recent Activity by Chuck

Show:

Answered: Milky water none in oil or transmission

Sounds like your radiator if you have an automatic trans.

Answered: Suzuki brake lines

sounds like a brake line hold down bracket.

Answered: 2002 chevrolet avalanche 5.3 2wd gear shift ...

you might need a linkage or a linkage adjustment.

Answered: Installing coil springs

Check the marks in the wheel, should be an impression as to were the old one sat in. Or the rubber insalator for the same. Chuck

Answered: Honda passport

Have you used a timing light before ? And what size motor do you have.

Answered: How do I fit a 2 1/2 in. exhaust pipe to a 2 1/4 ...

Onefastsailor: Some of the parts stores carry whats called adopters. All you need is one that is 2 1/2 in. ID (Inner diamiter) to a 2 1/4 OD (outer diamiter) or visa versa. You have to watch your ...

Answered: No spark

No Spark; Rule of thumb is to first tune it up. If you already have, then the most likely suspect would be the module, but if I remember right, those old fords had a ignition box mounted on the wheel ...

Answered: Brake pedal going to the floor

check to see if all 4 brakes are working, spin the wheel and have somebody step on the brake, If only front are working, or viseaversa, then the proportioning valve is stuck. Vary common. You need to ...

Answered: What would cause my 2004 f150 with a 5.4 triton ...

Switch a plug wires from 1 and 2 cyl. Reset comp. When check light comes on, see if it's no. one cyl. If it is then you need wires. See if this works. chuck

Answered: I need information about timing belts on 1988 ...

In 1988 the us did'nt make to many interference engines, not like they do now. Mostly the imports were. But now days I noticed that everytime I buy a timing belt they tell you it might damage ...

Activity Summary

Topics of Interest

Chuck did not provide topics yet.

Contacts

Chuck has no contacts.

Compliments

No compliments were posted on Chuck's profile yet.